8'/6' Tapered Tarp
Shipped from Bonner, Montana
- The Tarp
- Specifications
- Rigging
- Shipping
- Warranty
Not too big, not too small. This tarp tapers in width from about 8' at the head to 6' at the foot and is offered in two lengths to better fit your needs. We think this size tarp is the sweet spot for the solo camper.
- Tapered shape uses space efficiently
- Curved ridge and edges provide a taut pitch
- Recycled fabric option
- Silpoly won't sag when the temperature drops
- Lower water retention than silnylon
- Reflective tie-outs
- Great for partnering with your Bug Bivy or our 1P Bug Shelter.
Tie-outs
Perimeter tie-outs are located at each end of the ridge (2), the corners (4), and the midpoints of each side (2). There are hang loops located at each end of the ridge (2), the middle of the ridge (1), and about 14" in on the ridge from each end (2) (18" on the 10' tarp).
There is an additional tie-out on the ridge about 14" in from the narrow end (18" on the 10' tarp) to allow the option to pitch with an improvised rear beak. To make the beak, move the guyline from the rear apex to the shock cord loop on the ridge tie-out. We recommend using a fastline clip (included in the optional rigging kit). Stake out the rear corners so the rear edge is pulled taut between the corners.
Note that the color of the UltraGrid reinforcements may vary from what's shown.
Seam Sealing
You'll need to seam seal the ridgeline of this tarp prior to use as per these instructions (or use our service).
Compatible with:
- Bug Bivy: Y-zip, Chest zip, Ridge zip
- Wind Bivy
- Simple Tub
- Tub-floor
- Bug Canopy
- 1P Bug Shelter
Tarp Grades
We are currently training new employees and have tarps available in various quality levels as outlined below. Training and 2nds tarps will have their brand labels marked.
- 1sts: Tarps meeting our typical standards.
- Training: Tarps that are not quite to our standards but close. Usually, this is based more on an overall aesthetic evaluation rather than on specific flaws. 20% Off
- 2nds: These tarps may have more obvious, usually localized flaws that should not be of significant detriment to functionality or reliability. 30% Off
Made in the USA from imported materials.
Fabric Options
Eco Silpoly:
- Fabric: 20D SilPoly - RECYCLED
- Coating: Sil/PU Blend
- Hydrostatic Head: ~2000mm
- Learn more about material considerations on our Materials Page.
Membrane Silpoly:
- Fabric: 15D SilPoly
- Coating: Sil/PU Blend
- Hydrostatic Head: ~2000mm
Weight
Eco Silpoly:
- Tarp (9' length): 10.1 oz | 287g
- Tarp (10' length): TBD
- Stuff sack: 0.3 oz | 8g
- Landfill waste: 4.4 oz (waste from in-house manufacturing)
Membrane Silpoly:
- Tarp (9' length): 7.9 oz | 223g
- Tarp (10' length): TBD
- Stuff sack: 0.2 oz | 6g
- Landfill waste: TBD
Dimensions
9' Length Option:
- Front width: 8'-0" | 2.44m
- Rear width: 6'-0" | 1.83m
- Length: 9'-0" | 2.74m
- Packed size* (Eco): 8" x 5" x 2" | 20cm x 13cm x 5cm
- Packed size* (Membrane): 7" x 5" x 1.5" | 18cm x 13cm x 4cm
- Packed size is measured with tarp folded in the provided stuff sack. It can squish down to roughly half the stated size.
10 ft length Option:
- Front width: 8'-2" | 2.49m
- Rear width: 6'-2" | 1.88m
- Length: 10' | 3.05m
- Packed size (Eco): 8" x 5" x 2" | 20cm x 13cm x 5cm
- Packed size* (Membrane): 7" x 5" x 1.5" | 18cm x 13cm x 4cm
- Packed size is measured with tarp folded in the provided stuff sack. It can squish down to roughly half the stated size.
Required items:
- These items are not included
- Trekking poles (or other support for front and rear)
- Rigging
- Stakes: 6 Minimum
- Silicone Seam Sealer
Optional Rigging Kit:
- 30 ft x 1.8mm UHMWPE core cord (0.79 oz | 22.5g)
- 7 x 10mm Tensionlock Tensioners (0.26 oz | 7.5g)
- 1 x 10mm Fastline Clip (0.12 oz | 3.5g)
- 2 x Guyline Grommets (0.19 oz | 5.5g)
An optional rigging kit is available for those who wish to set up their tarp per our recommendations.
The kit comes with the following items:
- 30 ft of 1.8mm UHMWPE core guyline with reflective tracer
- 7 x 10mm Tensionlock guyline tensioners
- 1 x Fastline clip
- 2 x Guyline Grommets
Installation:
- Cut your guylines to the lengths shown below.
- Front corners: 40" x 2
- Rear corners: 30" x 2
- Front apex: 96" x 1
- Rear apex: 80" x 1
- Midpoints: 20" x 2
- Install the tensioners using a girth hitch (see images below). Install at all perimeter tie-outs except the rear apex
- Clip the fastline clip to the rear apex.
- Install guylines into the tensioners:
- Tie a loop in one end of each guyline. We prefer to use a bowline knot.
- Thread the guylines through the tensioners as shown in the photos below. For the two guylines that attach to the ridgeline, slip a grommet onto the guyline prior to threading it through the tensioner.
- Tie a knot in the untied end of each guyline. We use a simple overhand knot.
Girth Hitch:
Shipping Information
While most orders ship out within 1 - 3 business days, please allow up to one week for us to ship your order. This gives us some scheduling flexibility for getting out on the trail!*
*If you select seam sealing services with your purchase, please allow a few extra days for us to seal the item(s) and ship your order.
Domestic
We use USPS and UPS for domestic shipping.
(sorry, we're unable to offer shipping by UPS at this time)
| USPS Ground Advantage | USPS Priority | USPS Letter (Free) | ||
|---|---|---|---|---|
| Weight | Any weight | Any weight | Any weight | Stickers & DCF Patches only |
| Expected transit time (business days) |
2 - 5 | 3 - 6 | 2 - 4 | 2 - 6 |
| Tracking? (check your spam folder) |
Yes | Yes | Yes | No |
Notes:
- We may upgrade your shipping method from Ground Advantage to Priority Mail at our discretion and at no extra cost to you.
- Transit time is not guaranteed and does not include the time it takes us to prepare your order for shipment (see top of page) or any posted lead times.
- No UPS shipments to PO Boxes, please; select USPS to ship to your PO Box.
International
We offer shipping via UPS and the US Postal Service (USPS) to the following locations:
- Australia
- Canada
- Chile
- Colombia
- Costa Rica
- Europe (excluding Ukraine & Belarus)
- Hong Kong
- Japan
- Mexico
- New Zealand
- Panama
- Peru
- United Kingdom
| UPS Expedited |
USPS Priority |
USPS First-Class Package |
USPS First Class Mail (letter) |
|
|---|---|---|---|---|
| Restrictions | -- | -- | order value < $400 | Stickers & DCF Patches only |
| Expected transit time (business days) |
2 - 5 | 6 - 10 | varies by destination (often 10 - 25) |
varies by destination |
| Tracking? (check your spam folder) |
yes | USPS Tracking (may be limited after leaving US) | USPS Tracking (may be limited after leaving US) | No |
Notes:
- International shipping fees do not include import duties and fees which may be due upon delivery. We will not mismark values on customs forms.
- In rare cases when the calculated shipping rate significantly differs from the actual rate, we may revise the shipping rate and refund or bill you (with your approval) accordingly.
- Transit time is not guaranteed and does not include the time it takes us to prepare your order for shipment (see the top of the page) or any posted lead times. It's not unusual for parcels to be delayed in customs and this is out of our control.
- Shipments made by USPS will hand over to your country's postal system at Customs; tracking may be limited after the handoff.
- International shipping is via FOB Bonner, Montana terms. This means YAMA Mountain Gear is not responsible for lost, damaged, or stolen packages. If you run into a problem with your shipment, please let us know and we'll try to help. Ultimately, however, the customer bears the risk should something go wrong with shipping.
Warranty
We take pride in the quality of our products. Should you, the original owner, ever have a problem with your YAMA brand product due to a defect in workmanship, please contact us to arrange a repair or replacement. The warranty does not cover damage due to accidents, normal wear and tear, or misuse, and the buyer is responsible for all shipping costs and risk of loss or damage during shipment. Repairs not covered by the warranty can usually be performed for a reasonable fee.
YAMA will do its best to address warranty repairs and replacements in a timely manner; however, be aware that YAMA may close periodically, sometimes for extended periods (we need to get out on the trail sometimes!). During these times, if you have a warranty issue, send us an email, and we'll reply as soon as we can. Reasonable efforts will be made to resolve the issue quickly, but in some cases, you will have to wait until the shop reopens.
Please see the product description for any product-specific warranty policies.
YAMA Labs products, and products purchased in the 'Closeouts' section of the store, are not covered by the warranty unless otherwise stated.
The Tarp
Not too big, not too small. This tarp tapers in width from about 8' at the head to 6' at the foot and is offered in two lengths to better fit your needs. We think this size tarp is the sweet spot for the solo camper.
- Tapered shape uses space efficiently
- Curved ridge and edges provide a taut pitch
- Recycled fabric option
- Silpoly won't sag when the temperature drops
- Lower water retention than silnylon
- Reflective tie-outs
- Great for partnering with your Bug Bivy or our 1P Bug Shelter.
Tie-outs
Perimeter tie-outs are located at each end of the ridge (2), the corners (4), and the midpoints of each side (2). There are hang loops located at each end of the ridge (2), the middle of the ridge (1), and about 14" in on the ridge from each end (2) (18" on the 10' tarp).
There is an additional tie-out on the ridge about 14" in from the narrow end (18" on the 10' tarp) to allow the option to pitch with an improvised rear beak. To make the beak, move the guyline from the rear apex to the shock cord loop on the ridge tie-out. We recommend using a fastline clip (included in the optional rigging kit). Stake out the rear corners so the rear edge is pulled taut between the corners.
Note that the color of the UltraGrid reinforcements may vary from what's shown.
Seam Sealing
You'll need to seam seal the ridgeline of this tarp prior to use as per these instructions (or use our service).
Compatible with:
- Bug Bivy: Y-zip, Chest zip, Ridge zip
- Wind Bivy
- Simple Tub
- Tub-floor
- Bug Canopy
- 1P Bug Shelter
Tarp Grades
We are currently training new employees and have tarps available in various quality levels as outlined below. Training and 2nds tarps will have their brand labels marked.
- 1sts: Tarps meeting our typical standards.
- Training: Tarps that are not quite to our standards but close. Usually, this is based more on an overall aesthetic evaluation rather than on specific flaws. 20% Off
- 2nds: These tarps may have more obvious, usually localized flaws that should not be of significant detriment to functionality or reliability. 30% Off
Made in the USA from imported materials.
Specifications
Fabric Options
Eco Silpoly:
- Fabric: 20D SilPoly - RECYCLED
- Coating: Sil/PU Blend
- Hydrostatic Head: ~2000mm
- Learn more about material considerations on our Materials Page.
Membrane Silpoly:
- Fabric: 15D SilPoly
- Coating: Sil/PU Blend
- Hydrostatic Head: ~2000mm
Weight
Eco Silpoly:
- Tarp (9' length): 10.1 oz | 287g
- Tarp (10' length): TBD
- Stuff sack: 0.3 oz | 8g
- Landfill waste: 4.4 oz (waste from in-house manufacturing)
Membrane Silpoly:
- Tarp (9' length): 7.9 oz | 223g
- Tarp (10' length): TBD
- Stuff sack: 0.2 oz | 6g
- Landfill waste: TBD
Dimensions
9' Length Option:
- Front width: 8'-0" | 2.44m
- Rear width: 6'-0" | 1.83m
- Length: 9'-0" | 2.74m
- Packed size* (Eco): 8" x 5" x 2" | 20cm x 13cm x 5cm
- Packed size* (Membrane): 7" x 5" x 1.5" | 18cm x 13cm x 4cm
- Packed size is measured with tarp folded in the provided stuff sack. It can squish down to roughly half the stated size.
10 ft length Option:
- Front width: 8'-2" | 2.49m
- Rear width: 6'-2" | 1.88m
- Length: 10' | 3.05m
- Packed size (Eco): 8" x 5" x 2" | 20cm x 13cm x 5cm
- Packed size* (Membrane): 7" x 5" x 1.5" | 18cm x 13cm x 4cm
- Packed size is measured with tarp folded in the provided stuff sack. It can squish down to roughly half the stated size.
Required items:
- These items are not included
- Trekking poles (or other support for front and rear)
- Rigging
- Stakes: 6 Minimum
- Silicone Seam Sealer
Optional Rigging Kit:
- 30 ft x 1.8mm UHMWPE core cord (0.79 oz | 22.5g)
- 7 x 10mm Tensionlock Tensioners (0.26 oz | 7.5g)
- 1 x 10mm Fastline Clip (0.12 oz | 3.5g)
- 2 x Guyline Grommets (0.19 oz | 5.5g)
Rigging
An optional rigging kit is available for those who wish to set up their tarp per our recommendations.
The kit comes with the following items:
- 30 ft of 1.8mm UHMWPE core guyline with reflective tracer
- 7 x 10mm Tensionlock guyline tensioners
- 1 x Fastline clip
- 2 x Guyline Grommets
Installation:
- Cut your guylines to the lengths shown below.
- Front corners: 40" x 2
- Rear corners: 30" x 2
- Front apex: 96" x 1
- Rear apex: 80" x 1
- Midpoints: 20" x 2
- Install the tensioners using a girth hitch (see images below). Install at all perimeter tie-outs except the rear apex
- Clip the fastline clip to the rear apex.
- Install guylines into the tensioners:
- Tie a loop in one end of each guyline. We prefer to use a bowline knot.
- Thread the guylines through the tensioners as shown in the photos below. For the two guylines that attach to the ridgeline, slip a grommet onto the guyline prior to threading it through the tensioner.
- Tie a knot in the untied end of each guyline. We use a simple overhand knot.
Girth Hitch:
Shipping
Shipping Information
While most orders ship out within 1 - 3 business days, please allow up to one week for us to ship your order. This gives us some scheduling flexibility for getting out on the trail!*
*If you select seam sealing services with your purchase, please allow a few extra days for us to seal the item(s) and ship your order.
Domestic
We use USPS and UPS for domestic shipping.
(sorry, we're unable to offer shipping by UPS at this time)
| USPS Ground Advantage | USPS Priority | USPS Letter (Free) | ||
|---|---|---|---|---|
| Weight | Any weight | Any weight | Any weight | Stickers & DCF Patches only |
| Expected transit time (business days) |
2 - 5 | 3 - 6 | 2 - 4 | 2 - 6 |
| Tracking? (check your spam folder) |
Yes | Yes | Yes | No |
Notes:
- We may upgrade your shipping method from Ground Advantage to Priority Mail at our discretion and at no extra cost to you.
- Transit time is not guaranteed and does not include the time it takes us to prepare your order for shipment (see top of page) or any posted lead times.
- No UPS shipments to PO Boxes, please; select USPS to ship to your PO Box.
International
We offer shipping via UPS and the US Postal Service (USPS) to the following locations:
- Australia
- Canada
- Chile
- Colombia
- Costa Rica
- Europe (excluding Ukraine & Belarus)
- Hong Kong
- Japan
- Mexico
- New Zealand
- Panama
- Peru
- United Kingdom
| UPS Expedited |
USPS Priority |
USPS First-Class Package |
USPS First Class Mail (letter) |
|
|---|---|---|---|---|
| Restrictions | -- | -- | order value < $400 | Stickers & DCF Patches only |
| Expected transit time (business days) |
2 - 5 | 6 - 10 | varies by destination (often 10 - 25) |
varies by destination |
| Tracking? (check your spam folder) |
yes | USPS Tracking (may be limited after leaving US) | USPS Tracking (may be limited after leaving US) | No |
Notes:
- International shipping fees do not include import duties and fees which may be due upon delivery. We will not mismark values on customs forms.
- In rare cases when the calculated shipping rate significantly differs from the actual rate, we may revise the shipping rate and refund or bill you (with your approval) accordingly.
- Transit time is not guaranteed and does not include the time it takes us to prepare your order for shipment (see the top of the page) or any posted lead times. It's not unusual for parcels to be delayed in customs and this is out of our control.
- Shipments made by USPS will hand over to your country's postal system at Customs; tracking may be limited after the handoff.
- International shipping is via FOB Bonner, Montana terms. This means YAMA Mountain Gear is not responsible for lost, damaged, or stolen packages. If you run into a problem with your shipment, please let us know and we'll try to help. Ultimately, however, the customer bears the risk should something go wrong with shipping.
Warranty
Warranty
We take pride in the quality of our products. Should you, the original owner, ever have a problem with your YAMA brand product due to a defect in workmanship, please contact us to arrange a repair or replacement. The warranty does not cover damage due to accidents, normal wear and tear, or misuse, and the buyer is responsible for all shipping costs and risk of loss or damage during shipment. Repairs not covered by the warranty can usually be performed for a reasonable fee.
YAMA will do its best to address warranty repairs and replacements in a timely manner; however, be aware that YAMA may close periodically, sometimes for extended periods (we need to get out on the trail sometimes!). During these times, if you have a warranty issue, send us an email, and we'll reply as soon as we can. Reasonable efforts will be made to resolve the issue quickly, but in some cases, you will have to wait until the shop reopens.
Please see the product description for any product-specific warranty policies.
YAMA Labs products, and products purchased in the 'Closeouts' section of the store, are not covered by the warranty unless otherwise stated.