Ridge-zip Bug Bivy
Ridge-zip Bug Bivy
Ridge-zip Bug Bivy
Ridge-zip Bug Bivy
Ridge-zip Bug Bivy
Ridge-zip Bug Bivy
Ridge-zip Bug Bivy

Ridge-zip Bug Bivy

$110.00

NOTE: We are retiring this product to consolidate our product line. It will no longer be available after the remaining inventory is sold.

A simple bivy with entry from the side or above.

The ridge zipper on this bivy allows access from the side or above. It's a good option for those who want to leave the 'upper' draped loosely on the ground and then raise the apex after getting in. The zipper runs along the center of the netting from the leading edge to the rear apex. The width and height taper for efficiency, while the tub helps provide extra splash protection. Offered in two sizes and two lengths* to help dial in your setup.

  • Our lightest & simplest bivy.
  • Tapered shape for efficiency
  • Tub-floor provides extra splash protection.
  • Rigging for connecting the bivy to a tarp is included.

*If pairing with the Cirriform, the longer option will fit under the Regular Length 1P Cirriform Tarp (note that we strongly recommend the Y-zip Bug Bivy over the Chest zip for pairing with the Cirriform).


Partners well with our:

Which zip is right for me?

We also offer bivys with Y-zips and Chest zips.

  • Ridge Zip: Entry from the side/above. Best suited for tarp pitches that allow better access from the side or from the top. Mid-weight option.
  • Chest Zip: Entry from the front. Best suited for a-frame tarps, especially smaller ones. Lightest option.
  • Y-Zip: Entry from the front, side, diagonal, or above. Unzips all the way to the front corners which improves access. Well suited for most tarps. Heaviest option. Best bivy for pairing with our Cirriform Tarp, by far.

Made in Montana, USA from imported materials.

Weights

Bivy w/ 20D Floor
  • Regular Length
  • Smaller: 170g | 6.0 oz
  • Bigger: 181g | 6.8 oz

  • Longer Length
  • Smaller: n/a
  • Bigger: 215g | 7.6 oz

  • Stuff sack: 7g | 0.25 oz
Bivy w/ 40D Floor
  • Regular Length
  • Smaller: 234g | 8.3 oz
  • Bigger: 267g | 9.4 oz

  • Longer Length
  • Smaller: n/a
  • Bigger: TBD

  • Stuff sack: 13g | 0.44 oz
Rigging
  • 16' of 1/16" shockcord: 12g | 0.41 oz
  • 6 Clips: 5.8g | 0.21 oz
  • 2 Barrel cordlocks: 1.2g | 0.04 oz
  • Note: Rigging for connecting the bivy to your tarp is included, but you'll need to install it. You will likely not need to use all of the shockcord.
Environmental
  • Landfill waste: 113g | 4 oz
    (Average amount of landfill waste produced per bivy from in-house operations.)
  • Carbon Footprint: TBD

Dimensions

Smaller size
  • Width at head: 32" | 81.3 cm
  • Width at foot: 25" | 63.5 cm
  • Length (standard): 84" | 213.4 cm
  • Length (long): 90" | 228.6 cm
  • Height at head: 20" | 50.8 cm
  • Height at foot: 16" | 40.6 cm
  • Tub height: 4" | 10.2 cm
Bigger size
  • Width at head: 36" | 91.4 cm
  • Width at foot: 30" | 76.2 cm
  • Length (standard): 84" | 213.4 cm
  • Length (long): 90" | 228.6 cm
  • Height at head: 23" | 58.4 cm
  • Height at foot: 17" | 43.2 cm
  • Tub height: 6" | 15.2 cm

Materials

  • Floor: 20D Silpoly or 40D Silpoly available
    • Hydrostatic head for 20D: >4500mm
    • Hydrostatic head for 40D: ~2000mm
  • Upper: 0.6 oz Noseeum netting
  • Zipper: YKK size #3
  • Stuff sack: 20D or 40D Silpoly to match floor

Download our PDF pitching guide here.

The tub-floor is intended to be suspended from its top corners by clipping them out to your tarp's corners using the included rigging. Suspend the upper off or your face and feet by clipping it to points above. Or, simply let the bivy drape over you, maybe suspending the front apex to keep the netting off of your face. For recommendations on how to install the rigging, please see the "Rigging" tab.

You may wish to seam seal the corners of the tub-floor. It shouldn't be necessary for most situations, but may be helpful should you find water pooling on the ground around you.

For simpler set-up when pitched without a tarp, consider using the Stand-alone rigging kit which allows the bivy to be pitch with only 4 stakes and your poles. For more information, please see the link.

To get started

Included: Rigging (shock cord, clips, and cord locks) is included with the bivy. See the Specs for exactly what the bivy comes with.

You'll want to attach rigging to 6 locations on the bivy: top corners of the tub (4) and apexes (2).

To determine the length of the cords: Lay the bivy under your pitched tarp. Then, measure the distance from the bivy's corner to the tarp's associated corner. Cut the shock cord to that length (the two front lengths should be equal, as should the two lengths at the foot).


To install the cords:

You don’t need to follow our method, but this is how we like to do it.

At the corners

  1. Tie a loop on one end of the shock cord. We like to use a simple overhand loop knot.
  2. Using a clinch knot, tie on a mitten hook to the other end of the cord.
  3. Attach the loop end of the cord to the tub with a girth hitch.

At the apexes

  1. Tie a loop on one end of the shock cord using an overhand loop knot.
  2. Pass the free end of the cord through a cord lock.
  3. Pass the free end of the cord through the small webbing loop at the apex.
  4. Using a clinch knot, tie on a mitten hook to the free end of the cord.
  5. NOTE: On the Ridge & Y-zip, webbing loops are found on both sides of the zipper at the front apex. Pass the cord through the loop on the side opposite the side you'd like to bivy to open towards.

Stand-alone rigging kit:

For pitching the bivy on its own, we also offer a stand-alone rigging kit. This lightweight kit allows you to pitch the bivy with your poles and just four stakes. Please see the rigging kit's page for more information and instructions.

Product Availability

  • In most cases, items that are available to add to your cart are in-stock and ready to ship. Please refer to the shipping tab or page for expected fulfillment times.
  • Some items may be marked as "Avalable to backorder," "Made to order," and/or show a lead time. In these cases refer to the information on the product page for expected fulfillment times.
  • For items that are sold out, please refer to the production calendar and the Q & A below for more information.

Q: When can I expect the item I'm interested in to become available?

A: For most items, please refer to the production calendar at the bottom of this page. This calendar shows when we expect to work on more substantial products. For some accessory products, production may not always be scheduled in advance and availability may be unpredictable.

FYI: If you do not see the item that you are interested in, then we do not know when it may become available (We're often not scheduled far out in advance and don't have a private schedule beyond what's shown!).


Q: Can I pre-order, back-order, or reserve an item?

A: We don't typically reserve products, however there are some exceptions to this. For example, if someone orders an in-stock Cirriform and wants to also order an out-of-stock Bug Shelter for it, if the Bug Shelter is expected within a couple weeks, we'll usually make arrangements to reserve one of the Bug Shelters and hold the order so shipping may be combined.

On occasion, select products may be available to back-order or pre-order. When this happens, that status will be shown on the product page. If you're signed up for the stock notification, you will receive a notice that the item is available to back/pre-order.


Q: Can you let me know when the item becomes available?

A: Yes. On the product page, enter your email address in the space provided to be automatically notified when inventory becomes available. If you don't see where you can do this, please let me know; sometimes there's a fluke in the settings and the field doesn't show. Please note that the email notification could get filtered out as spam. You can try to 'whitelist' info@yamamountaingear.com to make sure the email comes through.


NOTES ON USING THE CALENDAR

- For products shown on the calendar, you can typically expect the item to be made available towards the end, or soon after the period shown on the calendar. Sometimes, however, some items may be listed earlier in the period. For example, if the calendar shows that I'm working on tapered tarps, certain sizes may become available earlier within the period with other sizes coming later.

- Items that specify "ongoing production" mean that we are continually working on these items and doing our best to maintain inventory. If the item or a particular size is sold out, you can expect it to likely become available soon.

- Please note that you can change the month shown on the calendar using the arrows at the top.

Shipping Information


While most orders ship out within 1 - 3 business days, please allow up to one week for us to ship your order. This gives us some scheduling flexibility for getting out on the trail!*

*If you select seam sealing services with your purchase, please allow a few extra days for us to seal the item(s) and ship your order.


Domestic

We use USPS and UPS for domestic shipping.

UPS Ground USPS Ground Advantage USPS Priority USPS Letter (Free)
Weight Any weight Any weight Any weight Stickers & DCF Patches only
Expected transit time
(business days)
1 - 5 2 - 5 1 - 3 1 - 5
Tracking?
(check your spam folder)
Yes Yes Yes No

Notes:

  • We may upgrade your shipping method from Ground Advantage to Priority Mail at our discretion and at no extra cost to you.
  • Transit time is not guaranteed and does not include the time it takes us to prepare your order for shipment (see top of page) or any posted lead times.
  • No UPS shipments to PO Boxes, please; select USPS to ship to your PO Box.

International

We offer shipping via UPS and the US Postal Service (USPS) to the following locations:

  • Canada
  • Hong Kong
  • Japan
  • Australia
  • New Zealand
  • Europe (excluding Ukraine & Belarus)
UPS
Expedited
USPS
First-Class Package
USPS
First Class Mail (letter)
Restrictions -- order value < $400 Stickers & DCF Patches only
Expected transit time
(business days)
2 -5 varies by destination
(often 10 - 25)
varies by destination
Tracking?
(check your spam folder)
yes possibly limited No

Notes:

  • International shipping fees do not include import duties and fees which may be due upon delivery. We will not mismark values on customs forms.
  • In rare cases when the calculated shipping rate significantly differs from the actual rate, we may revise the shipping rate and refund or bill you (with your approval) accordingly.
  • Transit time is not guaranteed and does not include the time it takes us to prepare your order for shipment (see the top of the page) or any posted lead times. It's not unusual for parcels to be delayed in customs and this is out of our control.
  • Shipments made by USPS will hand over to your country's postal system at Customs; tracking may be limited after the handoff.
  • International shipping is via FOB Bonner, Montana terms. This means YAMA Mountain Gear is not responsible for lost, damaged, or stolen packages. If you run into a problem with your shipment, please let us know and we'll try to help. Ultimately, however, the customer bears the risk should something go wrong with shipping.

Description

A simple bivy with entry from the side or above.

The ridge zipper on this bivy allows access from the side or above. It's a good option for those who want to leave the 'upper' draped loosely on the ground and then raise the apex after getting in. The zipper runs along the center of the netting from the leading edge to the rear apex. The width and height taper for efficiency, while the tub helps provide extra splash protection. Offered in two sizes and two lengths* to help dial in your setup.

  • Our lightest & simplest bivy.
  • Tapered shape for efficiency
  • Tub-floor provides extra splash protection.
  • Rigging for connecting the bivy to a tarp is included.

*If pairing with the Cirriform, the longer option will fit under the Regular Length 1P Cirriform Tarp (note that we strongly recommend the Y-zip Bug Bivy over the Chest zip for pairing with the Cirriform).


Partners well with our:

Which zip is right for me?

We also offer bivys with Y-zips and Chest zips.

  • Ridge Zip: Entry from the side/above. Best suited for tarp pitches that allow better access from the side or from the top. Mid-weight option.
  • Chest Zip: Entry from the front. Best suited for a-frame tarps, especially smaller ones. Lightest option.
  • Y-Zip: Entry from the front, side, diagonal, or above. Unzips all the way to the front corners which improves access. Well suited for most tarps. Heaviest option. Best bivy for pairing with our Cirriform Tarp, by far.

Made in Montana, USA from imported materials.

Specifications

Weights

Bivy w/ 20D Floor
  • Regular Length
  • Smaller: 170g | 6.0 oz
  • Bigger: 181g | 6.8 oz

  • Longer Length
  • Smaller: n/a
  • Bigger: 215g | 7.6 oz

  • Stuff sack: 7g | 0.25 oz
Bivy w/ 40D Floor
  • Regular Length
  • Smaller: 234g | 8.3 oz
  • Bigger: 267g | 9.4 oz

  • Longer Length
  • Smaller: n/a
  • Bigger: TBD

  • Stuff sack: 13g | 0.44 oz
Rigging
  • 16' of 1/16" shockcord: 12g | 0.41 oz
  • 6 Clips: 5.8g | 0.21 oz
  • 2 Barrel cordlocks: 1.2g | 0.04 oz
  • Note: Rigging for connecting the bivy to your tarp is included, but you'll need to install it. You will likely not need to use all of the shockcord.
Environmental
  • Landfill waste: 113g | 4 oz
    (Average amount of landfill waste produced per bivy from in-house operations.)
  • Carbon Footprint: TBD

Dimensions

Smaller size
  • Width at head: 32" | 81.3 cm
  • Width at foot: 25" | 63.5 cm
  • Length (standard): 84" | 213.4 cm
  • Length (long): 90" | 228.6 cm
  • Height at head: 20" | 50.8 cm
  • Height at foot: 16" | 40.6 cm
  • Tub height: 4" | 10.2 cm
Bigger size
  • Width at head: 36" | 91.4 cm
  • Width at foot: 30" | 76.2 cm
  • Length (standard): 84" | 213.4 cm
  • Length (long): 90" | 228.6 cm
  • Height at head: 23" | 58.4 cm
  • Height at foot: 17" | 43.2 cm
  • Tub height: 6" | 15.2 cm

Materials

  • Floor: 20D Silpoly or 40D Silpoly available
    • Hydrostatic head for 20D: >4500mm
    • Hydrostatic head for 40D: ~2000mm
  • Upper: 0.6 oz Noseeum netting
  • Zipper: YKK size #3
  • Stuff sack: 20D or 40D Silpoly to match floor

Set-up & use

Download our PDF pitching guide here.

The tub-floor is intended to be suspended from its top corners by clipping them out to your tarp's corners using the included rigging. Suspend the upper off or your face and feet by clipping it to points above. Or, simply let the bivy drape over you, maybe suspending the front apex to keep the netting off of your face. For recommendations on how to install the rigging, please see the "Rigging" tab.

You may wish to seam seal the corners of the tub-floor. It shouldn't be necessary for most situations, but may be helpful should you find water pooling on the ground around you.

For simpler set-up when pitched without a tarp, consider using the Stand-alone rigging kit which allows the bivy to be pitch with only 4 stakes and your poles. For more information, please see the link.

Rigging

To get started

Included: Rigging (shock cord, clips, and cord locks) is included with the bivy. See the Specs for exactly what the bivy comes with.

You'll want to attach rigging to 6 locations on the bivy: top corners of the tub (4) and apexes (2).

To determine the length of the cords: Lay the bivy under your pitched tarp. Then, measure the distance from the bivy's corner to the tarp's associated corner. Cut the shock cord to that length (the two front lengths should be equal, as should the two lengths at the foot).


To install the cords:

You don’t need to follow our method, but this is how we like to do it.

At the corners

  1. Tie a loop on one end of the shock cord. We like to use a simple overhand loop knot.
  2. Using a clinch knot, tie on a mitten hook to the other end of the cord.
  3. Attach the loop end of the cord to the tub with a girth hitch.

At the apexes

  1. Tie a loop on one end of the shock cord using an overhand loop knot.
  2. Pass the free end of the cord through a cord lock.
  3. Pass the free end of the cord through the small webbing loop at the apex.
  4. Using a clinch knot, tie on a mitten hook to the free end of the cord.
  5. NOTE: On the Ridge & Y-zip, webbing loops are found on both sides of the zipper at the front apex. Pass the cord through the loop on the side opposite the side you'd like to bivy to open towards.

Stand-alone rigging kit:

For pitching the bivy on its own, we also offer a stand-alone rigging kit. This lightweight kit allows you to pitch the bivy with your poles and just four stakes. Please see the rigging kit's page for more information and instructions.

Availability

Product Availability

  • In most cases, items that are available to add to your cart are in-stock and ready to ship. Please refer to the shipping tab or page for expected fulfillment times.
  • Some items may be marked as "Avalable to backorder," "Made to order," and/or show a lead time. In these cases refer to the information on the product page for expected fulfillment times.
  • For items that are sold out, please refer to the production calendar and the Q & A below for more information.

Q: When can I expect the item I'm interested in to become available?

A: For most items, please refer to the production calendar at the bottom of this page. This calendar shows when we expect to work on more substantial products. For some accessory products, production may not always be scheduled in advance and availability may be unpredictable.

FYI: If you do not see the item that you are interested in, then we do not know when it may become available (We're often not scheduled far out in advance and don't have a private schedule beyond what's shown!).


Q: Can I pre-order, back-order, or reserve an item?

A: We don't typically reserve products, however there are some exceptions to this. For example, if someone orders an in-stock Cirriform and wants to also order an out-of-stock Bug Shelter for it, if the Bug Shelter is expected within a couple weeks, we'll usually make arrangements to reserve one of the Bug Shelters and hold the order so shipping may be combined.

On occasion, select products may be available to back-order or pre-order. When this happens, that status will be shown on the product page. If you're signed up for the stock notification, you will receive a notice that the item is available to back/pre-order.


Q: Can you let me know when the item becomes available?

A: Yes. On the product page, enter your email address in the space provided to be automatically notified when inventory becomes available. If you don't see where you can do this, please let me know; sometimes there's a fluke in the settings and the field doesn't show. Please note that the email notification could get filtered out as spam. You can try to 'whitelist' info@yamamountaingear.com to make sure the email comes through.


NOTES ON USING THE CALENDAR

- For products shown on the calendar, you can typically expect the item to be made available towards the end, or soon after the period shown on the calendar. Sometimes, however, some items may be listed earlier in the period. For example, if the calendar shows that I'm working on tapered tarps, certain sizes may become available earlier within the period with other sizes coming later.

- Items that specify "ongoing production" mean that we are continually working on these items and doing our best to maintain inventory. If the item or a particular size is sold out, you can expect it to likely become available soon.

- Please note that you can change the month shown on the calendar using the arrows at the top.

Shipping

Shipping Information


While most orders ship out within 1 - 3 business days, please allow up to one week for us to ship your order. This gives us some scheduling flexibility for getting out on the trail!*

*If you select seam sealing services with your purchase, please allow a few extra days for us to seal the item(s) and ship your order.


Domestic

We use USPS and UPS for domestic shipping.

UPS Ground USPS Ground Advantage USPS Priority USPS Letter (Free)
Weight Any weight Any weight Any weight Stickers & DCF Patches only
Expected transit time
(business days)
1 - 5 2 - 5 1 - 3 1 - 5
Tracking?
(check your spam folder)
Yes Yes Yes No

Notes:

  • We may upgrade your shipping method from Ground Advantage to Priority Mail at our discretion and at no extra cost to you.
  • Transit time is not guaranteed and does not include the time it takes us to prepare your order for shipment (see top of page) or any posted lead times.
  • No UPS shipments to PO Boxes, please; select USPS to ship to your PO Box.

International

We offer shipping via UPS and the US Postal Service (USPS) to the following locations:

  • Canada
  • Hong Kong
  • Japan
  • Australia
  • New Zealand
  • Europe (excluding Ukraine & Belarus)
UPS
Expedited
USPS
First-Class Package
USPS
First Class Mail (letter)
Restrictions -- order value < $400 Stickers & DCF Patches only
Expected transit time
(business days)
2 -5 varies by destination
(often 10 - 25)
varies by destination
Tracking?
(check your spam folder)
yes possibly limited No

Notes:

  • International shipping fees do not include import duties and fees which may be due upon delivery. We will not mismark values on customs forms.
  • In rare cases when the calculated shipping rate significantly differs from the actual rate, we may revise the shipping rate and refund or bill you (with your approval) accordingly.
  • Transit time is not guaranteed and does not include the time it takes us to prepare your order for shipment (see the top of the page) or any posted lead times. It's not unusual for parcels to be delayed in customs and this is out of our control.
  • Shipments made by USPS will hand over to your country's postal system at Customs; tracking may be limited after the handoff.
  • International shipping is via FOB Bonner, Montana terms. This means YAMA Mountain Gear is not responsible for lost, damaged, or stolen packages. If you run into a problem with your shipment, please let us know and we'll try to help. Ultimately, however, the customer bears the risk should something go wrong with shipping.